Safety Tag Setting Dialog - Toshiba GSC1000-C Operation Manual

Safety Tag setting dialog

6.5.9
The "Safety Tag" dialog is to set the safety tag of a bay.
"Safety Tag" dialog is displayed when "Safety Tag" is selected from the context menu displayed
by right-clicking the bay name on the single line windows (Overview and Tr Parallel) and the
"GIS" window.

Name display area: Displays the voltage class and the bay name.

Safety tag radio button: Displays the setting status of the Safety Tag.
When a Safety Tag is set, the following symbol is displayed on the window.
"PTW": Permit to Work
"SFT": Sanction for Test
"LAP": Limited Access Permi t
Figure 6.5.17 Safety Tag dialog
To change the setting, set the radio button to .
You can set this setting for each bay.
289
6F2M2000