LDC MD Blocking dialog
6.4.3
The "LDC MD Blocking" dialog is used to set whether to transfer data transfer between LDC.
This dialog is displayed by clicking LDC MD Blocking in the main menu bar.
Gateway line selection combo box: Select the Gatewayline.
Signal selection area:
Signal sent or not sent to LDC is listed. Clicking ALL Open deploys all signals.
Blocking setting area: To set LDC MD blocking, select the signal from the signal selection area, click
Figure 6.4.8 LDC MD Blocking dialog
the "Set" radio button and then click OK or Apply.
265
6F2M2000