Manual Override dialog
6.5.10
The "Manual Override" dialog is used to set the device status and the measurement value
manually. Two types of "Manual Override" dialogs are provided; namely the dialog for device
and the dialog for a measurement value.
This dialog is displayed when a symbol on the single line diagram is right-clicked or the
device/measurement value in the "Bay Information" dialog is right-clicked, and "Manual
Override" is selected from the context menu.
1) The "Manual Override" dialog for a device
Figure 6.5.18 Manual Override dialog for device
Name display area: Displays the bay name and the device name.
Received Data from IED: Displays the status received from IED.
"Select the status" buttons:
Open Close
When the status is already set, the corresponding setting status button is displayed in
depressed and yellow.
Reset:
The status to set is selected by these buttons.
Clicking this button resets the manual override setting, and reflects online
status.
290
6F2M2000