Table of Contents
Advertisement
Tag dialog
6.5.15
The "Tag" dialog is used to place a Tag on the single line diagram windows, the "GIS" window
or the "System" window. Maximum 512 Tags can be placed.
This dialog is displayed by selecting [Edit] – [Tag] from the tool bar of the single line diagram
windows, the "GIS" window or the "System" window.
It can be also displayed by right-clicking a mouse at any point of the windows and "Tag" is
selected from the context menu.
The number of Tags placed is displayed in the "Tag Property" dialog (Refer to 6.5.16).
The Tag is placed on the window by drag& drop. When the Tag is placed, the "Tag" dialog is
closed.
Tag Property
6.5.16
The "Tag Property" dialog is used to check the number of placed Tags.
This dialog is displayed by selecting [Edit] – [Memorandum Property] from the tool bar of the
single line diagram windows, the "GIS" window or the "System" window.
Figure 6.5.24 Tag dialog
Figure 6.5.25 Tag Property dialog
296
6F2M2000
Advertisement
Table of Contents
