Y-Axis Setting For The Trend Window - Toshiba GSC1000-C Operation Manual

6.9.12 Y-Axis Setting for the Trend window

If Y-axis Setting... of the "Group Property" dialog is clicked, the "Y-axis Setting" dialog is
displayed. Normally the Y-axis area of the "Trend" window is set to "Auto" position. If you want
to change the Y-axis area, change "Auto" position to "Manual" position and set the parameter
appropriately. Y-axis setting is saved for each group.
1) Max
Input the maximum value of the Y-Axis.
2) Origin Base
Input the value of the crossing point with X-Axis.
3) Min
Input the minimum value of the Y-Axis.
Figure 6.9.13 Y-Axis Setting dialog
340
6F2M2000