Figure 6.4.2 Blocking/Manual Override Summary dialog
[Bay/IED Name]: Bay name or IED name is displayed.
[Device Name]: Device name is displayed
[Blocking]:
Whether blocking is set or not is displayed.
C: Control Blocking is set
E: Event Blocking is set
A: Alarm Blocking is set
P: Print Blocking is set
U: Update Blocking is set
[M]:
Whether Manual Override setting is set or not is displayed.
M: Manual Override is set
- : This mark is displayed when the device is IED.
Blocking Reset:
When any row in the list is selected, the button becomes active.
When this button is clicked, all blocking of the selected device are reset collectively.
Override Reset:
When any row in the list is selected, the button becomes active.
When this button is clicked, manual override of the selected device is reset.
To reset the blocking (C, E, A, P, U) individually, use the "Blocking" dialog (Refer
to 6.5.11.)
POINT
260
6F2M2000