Auto Print Setting Dialog (For Event) - Toshiba GSC1000-C Operation Manual

 Sort:
Data is sorted when the title cell of the column ( a) to h) ) of the column is clicked. (Sorting
order is numerical order>alphabetical order)
Real time updating is not carried out after sorting. To resume real time updating, click
LATEST.
 Adjustment of Column width
Width of each column is automatically adjusted by double-clicking the boundary between
columns. The width is adjusted to the wider one; either maximum width of a column title
(item name) or maximum width of column data. You can also adjust the width to the
desired one by dragging the boundary between columns.
Table Filter dialog
6.7.1
Refer to "Table Filter" dialog of the "Alarm" window. (Section 6.6.1).
However, check boxes of "Alarm Status", "Not Ack", and "In Fault" are not displayed.

Auto Print Setting dialog (for Event)

6.7.2
The "Auto Print Setting" dialog is used to set or cancel automatic printing of event log.
This dialog is displayed by selecting [File]-[Auto Print Setting] in the menu bar of the "Event
"window.
 Daily:
 Weekly:
 Monthly:
Figure 6.7.2 Auto Print Setting dialog
Specifies daily printing.
Specifies weekly printing.
Specifies monthly printing.
311
6F2M2000