Table of Contents
Advertisement
(2)
Problems common to all windows
Phenomenon
Main Menu bar is not
displayed.
Window switching button
cannot be pressed
No reaction even if the
window switching button
is clicked.
No printing is performed
even if the hard copy
button is clicked.
Sound stop button has no
effect.
Blink stop button has no
effect.
No reaction when clicking
the Help button.
Cause
SC is not started.
SC is not in normal mode.
You clicked right button of the
mouse.
Resource such as memory for
HMI (PC) OS is insufficient.
You clicked right button of the
mouse.
Resource such as memory for
HMI (PC) OS is insufficient.
You clicked right button of the
mouse.
Resource such as memory for
HMI (PC) OS is insufficient.
Printer failure.
Printer paper is run-out
Printer setting different from the
printer setting of HMI (PC)
(printer setting of OS).
Printer IP address is different
from the setting.
Printer IP address of the
equipment DB is different.
SC application error.
HMI (PC) application error.
SC application error.
HMI (PC) application error.
HMI (PC) application error.
375
Corrective action
Start up SC.
Check that LED (STTS1) of SC unit
lights in red. If it does not light,
restart SC.
Click left button of the mouse.
Terminate unnecessary applications
to secure the memory area.
If not improved, restart HMI (PC).
Click left button of the mouse.
Terminate unnecessary applications
to secure the memory area.
If not improved, restart HMI (PC).
Click left button of the mouse.
Terminate unnecessary applications
to secure the memory area.
If not improved, restart HMI (PC).
Remove the failure cause of the
printer.
Replenish printer paper.
Return the correct network printer
setting.
Return the correct IP address.
Return the correct IP address setting
by maintaining equipment DB.
Restart SC.
Try to stop alarm from other HMI
(PC).
Restart HMI (PC).
Restart SC.
Try to stop blinking from other HMI
(PC).
Restart HMI (PC).
Restart HMI (PC).
6F2M2000
Advertisement
Table of Contents
