Displaying A Bay From The Overview Window - Toshiba GSC1000-C Operation Manual

Displaying a Bay from the Overview Window

4.13
How to display the bay single line diagram and the "Bay Information" dialog from the "Overview"
window is indicated below.
1) Perform any of the following:
(a) Click the bay select combo box at the upper
part of the "Overview" window.
(b) Click Bay in the "Overview" window to
display the "Bay List" dialog.
Select the bay name and click OK.
2) Bay single line diagram, the "Bay Information"
dialog and "Bus Coupler/Bus Section" diagram
are displayed.
Refer to section 6.11.4 for the meaning of each
symbols.
Note 1) You can move display position of "Bay
Information"
Coupler/Bus Section" diagram freely
within the screen.
Note 2) Showing/hiding Bay information dialog
can be setup by external file(ini. File).
51
6F2M2000
dialog and "Bus