6F2M2000
2) S43R dialog is displayed. The current S43R
local/remote setting status is displayed for each
voltage. Click the name of the Voltage Level
that change the setting of the control right. And
click Select button.
Note 1)
When Voltage Level is set with Tool,
the Substation tab which is the upper tab is also
displayed (the Status column is blank). After
selecting the substation name, click Select
button.
Note 2)
S43R dialog is displayed. By
selecting the Remote or Local button in the
Control column and clicking Execute, all of 43R
statuses can be set to Remote or Local at once.
359