Table of Contents
Advertisement
(5)
Speakers
Phenomenon
No sound produced
Sound distorts
(6)
Printer (Color laser printer)
Phenomenon
Unable to switch on
power
Unable to print
Causes
Volume is low.
Cable is unplugged from
OWS/EWS.
Volume inside OWS/EWS is low.
Headphone is connected.
Speaker Unit is not correctly
connected to the OWS/EWS.
Volume inside OWS/EWS is
high.
Cable from OWS/EWS not
connected correctly.
Causes
Power cable is not connected
correctly.
Power source is not supplied to
printer.
No paper. 'Paper Out' LED is
illuminated.
No toner. 'Toner Out' message is
displayed.
Cable from station level LAN is
not connected correctly to printer
converter.
Cable between converter and
printer not connected correctly.
Power off at the converter.
OWS/EWS is not set for
connection to a remote printer.
Remote printer is not set for use
as OWS/EWS standard printer.
371
Corrective action
Adjust volume.
Check cable connection.
Set OWS/EWS to maintenance
mode and select 'multimedia' in the
'control panel' of 'my computer' and
adjust the playback volume.
Unplug the headphone.
Check the Speaker Unit is correctly
connected to the OWS/EWS.
Set OWS/EWS to maintenance
mode and select 'multimedia' in the
'control panel' of 'my computer' and
adjust the playback volume.
Check cable connection.
Corrective action
Check cable connection.
Check AC power source.
Replenish paper.
Replenish toner.
Exchanges media converter
between optical cord and twisted
pair cable.
Check cable connection.
Check the power at the converter.
Set remote printer to OWS/EWS.
Set OWS/EWS to maintenance
mode and select remote printer from
'printer' in 'my computer'. Then
select 'printer' from menu bar and
check printer that is in normal use.
6F2M2000
Advertisement
Table of Contents
