System Shutdown - Toshiba GSC1000-C Operation Manual

3.9
System shutdown is carried out by the following procedure. (Refer to Figure 3.9.1.)
OWS
EWS
Log Hard Copy
Printer Printer
ESW ESW
BCU BCU
GIS Local Control Panels
Bay level equipment

System Shutdown

Step 1. The OWS and EWS are turned off.
Step 2. The Hard Copy printer and Log printer are turned off.
Step 3. The Station Computers are turned off.
Step 4. The common panels are turned off.
Step 5. The server panels are turned off.
Step 6. The bay level equipment is turned off.
Remote
Monitoring
Modem Router
GPS
Time server
Station
Computer
ESW
ESW
ESW
BCU
Figure 3.9.1 An example of System configuration
Be sure to follow the procedure above to shut down the OWS/EWS. If the OWS/EWS
is shut down forcibly by switches at the auxiliary box without following the correct
procedure, then corruption of the internal data such as event information stored in
the OWS/EWS may occur.
Please keep the USB key inserted to OWS/EWS.
Station
Computer
ESW
Server Panels
Relay
IFU
Relay
Relay
Relay Relay
Protection Relay Panels
40
BCU BCU BCU
ESW ESW ESW
Common Panels
ESW
Relay
IFU IFU
Relay
Relay
Relay
6F2M2000
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6