Setting The Vitc Reader Line For Sd Video Inputs (Not Yet Implemented); Setting The Vitc Writer Line For Sd Video Outputs (Not Yet Implemented); Setting The Source Of Time Code (Not Yet Implemented); Figure 6-3: Rp188 Pulldown Sequence A Frame Alignment - 1080P/23.98Sf Input Video - evertz 7700 Manual

1080p/24sF
A Frame Candidate
A Fram e Offset
0
1
2
3
Figure 6-3: RP188 Pulldown Sequence A Frame Alignment – 1080p/23.98sF Input Video

6.3.6. Setting the VITC Reader Line for SD Video Inputs (Not Yet Implemented)

Video
VITC Reader Line
14 for 525
19 for 625
n/a

6.3.7. Setting the VITC Writer Line for SD Video Outputs (Not Yet Implemented)

Video
VITC Generator Line
14 for 525
19 for 625

6.3.8. Setting the source of Time Code (Not Yet Implemented)

Video
Time Code Source
Embedded
External LTC
off
:00 :01
With this control, you can select the line number where VITC will be read on
the standard definition input video.
525i/59.94 inputs, 6 to 22 for 625i/50 inputs.
The value shown is n/a when this menu item does not apply to the input
standard.
With this control, you can select the line number where VITC will be written
on standard definition output video.
525i/59.94 inputs, 6 to 22 for 625i/50 inputs.
This control selects the source of Timecode. Either Embedded or the
external LTC input if available.
Select embedded to use RP188 ancillary time code (ATC) as the source for
high definition video formats or Vertical interval time code (VITC) as the
source for standard definition video formats.
The value shown is off when this menu item does not apply to the input
standard.
Revision 1.1
7700 MultiFrame Manual
7714HDC High Quality Down Converter
:02 :03
The valid range is 10 to 20 for
The valid range is 10 to 20 for
7714HDC - 17