Table of Contents
Advertisement
7.5.1.8. Setting the Brightness
Video/SID
Analog Video
Brightness
-7.5 to 15.0
0.0
7.5.2. Setting the Input Video Standard
Video/SID
Video Standard
Auto
625
525
7.5.3. Loss of Video
Video/SID
Loss of Video
Black
Pass
7.5.4. Setting the VITC Line Number – 525 Line Video
Video/SID
525 VITC line
10 to 32
10
7.5.5. Setting the VITC Line Number – 625 Line Video
Video/SID
625 VITC line
6 to 32
10
7.5.6. Setting the PESA Source ID Line Number – 525 Line Video
Video/SID
525 PESA line
10 to 21
11
7735AVC-LB Video Composite Encoder and Audio DAC with SoftSwitch
This control allows the user to adjust the brightness of the analog video in
increments of 0.1 IRE.
This control enables the user to set the video standard to 625 (PAL) or 525
(NTSC).
This control is used to determine what action to take when the video input
is missing. The user can either have the output video go to black or pass
whatever data is at the input.
This control enables the user to set the VBI line number that contains the
VITC information when operating in 525 video mode.
This control enables the user to set the VBI line number that contains the
VITC information when operating in 625 video mode.
If the VITC contains Source ID (SID) information, the AVC will
automatically decode it.
If the wrong line number is set, no time code (or SID) will be decoded.
This control enables the user to set the VBI line number that contains the
PESA SID information when operating in 525 video mode. If the wrong line
number is set, no SID will be decoded.
Revision 1.6
7700 MultiFrame Manual
7735AVC-LB - 21
Advertisement
Table of Contents
