Setup Menu Items; Selecting The Type Of Video Being Used; Selecting The Line Caption Data Will Be Encoded On; Selecting Whether The Internal Modem Will Auto Answer - evertz 8084 Instruction Manual

3.2

SETUP MENU ITEMS

)VIDEO TYPE
Type 422 525
Type 422 625
)OUTPUT LINE
Line = 21
Note that the built-in monitoring caption decoder is fixed at Line 21 for NTSC
and Line 22 for PAL captions, so it will not display captions if a non-standard
caption line is selected.
)MODEM D
ModemD = disabled
ModemD = enabled
ModemD = hangup
OPERATION
Models 8084/8084AD/8085 Closed Caption Encoder Manual
When in the Setup or Engineering menus, the front panel is used to display
the current menu item and selected option.
The Setup menu is used to configure the basic operational modes of the
Closed Caption Encoder such as selecting which type of video is present,
which data channel will be shown on the decoder output, etc. A ")" symbol
to the left of the main level menu items allows them to be easily
distinguished from the front panel operating messages. The sub-menu
choices are shown in lower case to allow them to be easily distinguished
from the main level items. Items shown in bold are the factory default
values.
3.2.1

Selecting The Type Of Video Being Used

VIDEO TYPE is used to select the correct digital video format.
Select Type 422 525 for operation with component video with a
line rate of 525 lines per frame. (Conforming to SMPTE-125M)
Select Type 422 625 for operation with component video with a
line rate of 625 lines per frame. (Conforming to EBU Tech-
3267 E)
3.2.2

Selecting the Line Caption Data Will be Encoded On

OUTPUT LINE is used to select the line that caption data will be encoded
on. Normally caption data is encoded on line 21 in NTSC
systems and line 22 in PAL systems. Using this function, the
user may select one of lines 11 to 25 in NTSC and 6 to 25 in
PAL. Press the
Use the and
line number will immediately change when the
are pressed.
3.2.3

Selecting Whether the Internal Modem will Auto Answer

MODEM D is used to select whether the built in modem is enabled for
receiving phone calls. When the second modem is installed
there will be a similar menu item for Modem E.
Revision 1.6.6
key to see what line is currently selected.
keys to change the line numbers. The output
and keys
Page 3-12