Output - Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual

Proline Promass E 500 PROFINET
Output signal
Endress+Hauser
16.4

Output

PROFINET
Standards
Current output 0/4 to 20 mA
Current output
Current range
Maximum output values
Open-circuit voltage
Maximum input voltage
Load
Resolution
Damping
Assignable measured
variables
Current output 0/4 to 20 mA Ex i
Current output
Current range
Maximum output values
Open-circuit voltage
Maximum input voltage
Load
Resolution
In accordance with IEEE 802.3
0/4 to 20 mA
Can be set to:
• 4 to 20 mA (passive)
• 0/4 to 20 mA (active)
22.5 mA
DC 28.8 V (active)
DC 30 V (passive)
0 to 700 Ω
0.38 µA
Configurable: 0.07 to 999 s
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Electronics temperature
• Oscillation frequency 0
• Oscillation damping 0
• Signal asymmetry
• Exciter current 0

The range of options increases if the measuring device has one or more
application packages.
0/4 to 20 mA Ex i
Can be set to:
• 0/4 to 20 mA (active)
• 4 to 20 mA (passive)
22.5 mA
DC 21.8 V (active)
DC 30 V (passive)
• 0 to 400 Ω (active)
• 0 to 700 Ω (passive)
0.38 µA
Technical data
257