Output And Input Variants - Endress+Hauser Proline Prosonic Flow P 500 Technical Information

Proline Prosonic Flow P 500

Output and input variants

Order code for "Output; input 1" (020) →
Current output 4 to 20 mA HART
Current output 4 to 20 mA HART Ex i passive
Current output 4 to 20 mA HART Ex i active
Modbus RS485
Order code for "Output; input 2" (021) →
Not used
Current output 4 to 20 mA
Current output 4 to 20 mA Ex i passive
User-configurable input/output
Pulse/frequency/switch output
2)
Pulse output, phase-shifted
Pulse/frequency/switch output Ex i passive
Relay output
Current input 0/4 to 20 mA
Status input
1) A specific input or output can be assigned to a user-configurable input/output →  25.
2) If "pulse output, phase-shifted" (F) is selected for output/input 2 (021), only the "pulse output, phase-shifted" (F) option is available for selection
for output/input 3 (022).
Endress+Hauser
Output
Depending on the option selected for output/input 1, different options are available for the other
outputs and inputs. Only one option can be selected for each output/input 1 to 3. The following
tables must be read vertically (↓).
Example: If the option BA "4–20 mA HART" was selected for output/input 1, one of the options A, B,
D, E, F, H, I or J is available for output 2 and one of the options A, B, D, E, F, H, I or J is available for
output 3.
Output/input 1 and options for output/input 2
Options for output/input 3 →  20
1)
Possible options
BA
↓ CA
↓
↓ ↓
A A
B
C
D
E
F
G
H
I
J
CC
MA
↓ ↓
A A
B
C
D
E
F
G
H
I
J
19