Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual page 137

Proline Promass E 500 PROFINET
Parameter
0% bargraph value 1
100% bargraph value 1
Value 2 display
Value 3 display
0% bargraph value 3
100% bargraph value 3
Value 4 display
* Visibility depends on order options or device settings
Endress+Hauser
Prerequisite
A local display is provided.
A local display is provided.
A local display is provided.
A local display is provided.
A selection was made in the
Value 3 display parameter.
A selection was made in the
Value 3 display parameter.
A local display is provided.
Description
Enter 0% value for bar graph
display.
Enter 100% value for bar
graph display.
Select the measured value that
is shown on the local display.
Select the measured value that
is shown on the local display.
Enter 0% value for bar graph
display.
Enter 100% value for bar
graph display.
Select the measured value that
is shown on the local display.
Commissioning
Selection / User Factory setting
entry
• Application
*
specific output 1
• Index
inhomogeneous
medium
• Application
*
specific output 0
• Index suspended
*
bubbles
Signed floating-point Country-specific:
number • 0 kg/h
• 0 lb/min
Signed floating-point Depends on country
number and nominal
diameter
For the picklist, see None
the Value 2 display
parameter
(→  137)
For the picklist, see None
the Value 2 display
parameter
(→  137)
Signed floating-point Country-specific:
number • 0 kg/h
• 0 lb/min
Signed floating-point 0
number
For the picklist, see None
the Value 2 display
parameter
(→  137)
137