Table of Contents
Advertisement
Accessories
252
15.3
Service-specific accessories
Accessories
Applicator
W@M
FieldCare
DeviceCare
15.4
System components
Accessories
Description
Memograph M graphic
The Memograph M graphic data manager provides information on all the relevant
data manager
measured variables. Measured values are recorded correctly, limit values are
monitored and measuring points analyzed. The data are stored in the 256 MB
internal memory and also on a SD card or USB stick.
Cerabar M
The pressure transmitter for measuring the absolute and gauge pressure of gases,
steam and liquids. It can be used to read in the operating pressure value.
Cerabar S
The pressure transmitter for measuring the absolute and gauge pressure of gases,
steam and liquids. It can be used to read in the operating pressure value.
iTEMP
The temperature transmitters can be used in all applications and are suitable for
the measurement of gases, steam and liquids. They can be used to read in the
medium temperature.
Description
Software for selecting and sizing Endress+Hauser measuring devices:
• Choice of measuring devices for industrial requirements
• Calculation of all the necessary data for identifying the optimum flowmeter:
e.g. nominal diameter, pressure loss, flow velocity and accuracy.
• Graphic illustration of the calculation results
• Determination of the partial order code, administration, documentation and
access to all project-related data and parameters over the entire life cycle of
a project.
Applicator is available:
• Via the Internet:
https://portal.endress.com/webapp/applicator
• As a downloadable DVD for local PC installation.
W@M Life Cycle Management
Improved productivity with information at your fingertips. Data relevant to a
plant and its components is generated from the first stages of planning and
during the asset's complete life cycle.
W@M Life Cycle Management is an open and flexible information platform
with online and on-site tools. Instant access for your staff to current, in-depth
data shortens your plant's engineering time, speeds up procurement processes
and increases plant uptime.
Combined with the right services, W@M Life Cycle Management boosts
productivity in every phase. For more information, visit
www.endress.com/lifecyclemanagement
FDT-based plant asset management tool from Endress+Hauser.
It can configure all smart field units in your system and helps you manage
them. By using the status information, it is also a simple but effective way of
checking their status and condition.
Operating Instructions BA00027S and BA00059S
Tool to connect and configure Endress+Hauser field devices.
Innovation brochure IN01047S
• Technical Information TI00133R
• Operating Instructions BA00247R
• Technical Information TI00426P and TI00436P
• Operating Instructions BA00200P and BA00382P
• Technical Information TI00383P
• Operating Instructions BA00271P
"Fields of Activity" document FA00006T
Proline Promass E 500 PROFINET
Endress+Hauser
Advertisement
Table of Contents
