Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual page 31

Proline Promass E 500 PROFINET
Endress+Hauser
Post mounting
WARNING
L
Excessive tightening torque applied to the fixing screws!
Risk of damaging the plastic transmitter.
‣
Tighten the fixing screws as per the tightening torque: 2 Nm (1.5 lbf ft)
ø
20...70
ø
( 0.79...2.75)
4 x
SW 10
 12 Engineering unit mm (in)
Wall mounting
17 (0.67)
 13 Engineering unit mm (in)
L Depends on order code for "Transmitter housing"
Order code for "Transmitter housing"
• Option A, aluminum coated: L =14 mm (0.55 in)
• Option D, polycarbonate: L = 13 mm (0.51 in)
1. Drill the holes.
=
L
5.8 (0.23)
5.8 (0.23)
Installation
3 x TX 25
=
149 (5.85)
A0029051
A0029054
31