Prerequisites - Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual

Operation options
82
8.4.2

Prerequisites

Computer hardware
Hardware
Interface
Connection
Screen
Computer software
Software
Recommended operating
systems
Web browsers supported
Computer settings
Settings
User rights
Proxy server settings of the
Web browser
JavaScript
Network connections
In the event of connection problems: →  175
Interface
CDI-RJ45
The computer must have an RJ45
interface.
Standard Ethernet cable with RJ45
connector.
Recommended size: ≥12" (depends on the screen resolution)
Interface
CDI-RJ45
• Microsoft Windows 7 or higher.
• Mobile operating systems:
• iOS
• Android

Microsoft Windows XP is supported.
• Microsoft Internet Explorer 8 or higher
• Microsoft Edge
• Mozilla Firefox
• Google Chrome
• Safari
Interface
CDI-RJ45
Appropriate user rights (e.g. administrator rights) for TCP/IP and proxy server
settings are necessary (for adjusting the IP address, subnet mask etc.).
The Web browser setting Use a Proxy Server for Your LAN must be
deselected .
JavaScript must be enabled.

If JavaScript cannot be enabled:
enter http://192.168.1.212/basic.html in the address line of the Web
browser. A fully functional but simplified version of the operating menu
structure starts in the Web browser.

When installing a new firmware version: To enable correct data display,
clear the temporary memory (cache) of the Web browser under Internet
options.
Only the active network connections to the measuring device should be used.
Switch off all other network
connections such as WLAN.
Proline Promass E 500 PROFINET
WLAN
The operating unit must have a
WLAN interface.
Connection via Wireless LAN.
WLAN
WLAN
Switch off all other network
connections.
Endress+Hauser