Mounting The Measuring Device; Required Tools - Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual

Proline Promass E 500 PROFINET
Endress+Hauser
280 (11.0)
146 (5.75)
 11 Weather protection cover for Proline 500
Cover locking: Proline 500
NOTICE
Order code for "Transmitter housing", option L "Cast, stainless": The covers of the
transmitter housing are provided with a borehole to lock the cover.
The cover can be locked using screws and a chain or cable provided by the customer.
‣
It is recommended to use stainless steel cables or chains.
‣
If a protective coating is applied, it is recommended to use a heat shrink tube to protect
the housing paint.
1
1
1 Cover borehole for the securing screw
2 Securing screw to lock the cover
6.2

Mounting the measuring device

6.2.1

Required tools

For transmitter
For mounting on a post:
• Proline 500 – digital transmitter
• Open-ended wrench AF 10
• Torx screwdriver TX 25
• Proline 500 transmitter
Open-ended wrench AF 13
134 (5.3)
1
255 (10.0)
12 (0.47) 30 (1.18)
1
2
SW 2.5
5 (0.2) min. 15 (0.6)
Installation
A0029553
2
A0029799
29