Table of Contents
Advertisement
Operation options
88
8.4.7
Logging out
Before logging out, perform a data backup via the Data management function
(upload configuration from device) if necessary.
1. Select the Logout entry in the function row.
The home page with the Login box appears.
2. Close the Web browser.
3. If no longer needed:
Reset modified properties of the Internet protocol (TCP/IP) → 83.
If communication with the Web server was established via the default IP address
192.168.1.212, DIP switch No. 10 must be reset (from ON → OFF). Afterwards, the IP
address of the device is active again for network communication.
8.5
Access to the operating menu via the operating tool
The structure of the operating menu in the operating tools is the same as for operation via
the local display.
8.5.1
Connecting the operating tool
Via PROFINET network
This communication interface is available in device versions with PROFINET.
Star topology
31
Options for remote operation via PROFINET network: star topology
1
Automation system, e.g. Simatic S7 (Siemens)
2
Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or
computer with operating tool (e.g. FieldCare, DeviceCare, SIMATIC PDM) with COM DTM "CDI Communication
TCP/IP"
3
Switch, e.g. Scalance X204 (Siemens)
4
Measuring device
Ring topology
The device is integrated via the terminal connection for signal transmission (output 1) and
the service interface (CDI-RJ45).
1
3
4
4
Proline Promass E 500 PROFINET
2
4
Endress+Hauser
A0026545
Advertisement
Table of Contents
