Table of Contents
Advertisement
Proline Promass E 500 PROFINET
Terminal assignment
Device plugs available
Supply voltage
Power consumption
Current consumption
Power supply failure
Electrical connection
Potential equalization
Endress+Hauser
Supported functions
System integration
16.5
Power supply
→ 39
→ 39
Order code for
"Power supply"
Option D
Option E
Option I
Transmitter
Max. 10 W (active power)
switch-on current
Max. 36 A (<5 ms) as per NAMUR Recommendation NE 21
Transmitter
• Max. 400 mA (24 V)
• Max. 200 mA (110 V, 50/60 Hz; 230 V, 50/60 Hz)
• Totalizers stop at the last value measured.
• Depending on the device version, the configuration is retained in the device memoryor in
the pluggable data memory (HistoROM DAT).
• Error messages (incl. total operated hours) are stored.
→ 51
→ 58
• Identification & Maintenance
Simple device identification via:
• Control system
• Nameplate
• Measured value status
The process variables are communicated with a measured value status
• Blinking feature via the onsite display for simple device identification and
assignment
• Device operation via operating tools (e.g. FieldCare, DeviceCare, SIMATIC
PDM)
Information on system integration → 96.
• Cyclic data transmission
• Overview and description of the modules
• Status coding
• Startup configuration
• Factory setting
Terminal voltage
DC24 V
±20%
AC100 to 240 V
–15...+10%
DC24 V
±20%
AC100 to 240 V
–15...+10%
Technical data
Frequency range
–
50/60 Hz
–
50/60 Hz
263
Advertisement
Table of Contents
