Table of Contents
Advertisement
Proline Promass E 500 PROFINET
Parameter
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
Endress+Hauser
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
Parameter overview with brief description
Prerequisite
A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
–
11.6.1
Function scope of the "Control Totalizer" parameter
Options
Description
Totalize
The totalizer is started or continues running.
Reset + hold
The totaling process is stopped and the totalizer is reset to 0.
Preset + hold
The totaling process is stopped and the totalizer is set to its defined start value
from the Preset value parameter.
Reset + totalize
The totalizer is reset to 0 and the totaling process is restarted.
Preset + totalize
The totalizer is set to the defined start value from the Preset value parameter and
the totaling process is restarted.
Hold
Totalizing is stopped.
11.6.2
Function scope of the "Reset all totalizers" parameter
Options
Description
Cancel
No action is executed and the user exits the parameter.
Reset + totalize
Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.
Description
Control totalizer value.
Specify start value for totalizer.
Dependency
The unit of the selected
process variable is
specified for the totalizer
in the Unit totalizer
parameter.
Reset all totalizers to 0 and
start.
→ 169
→ 169
→ 169
Selection / User
Factory setting
entry
• Totalize
Totalize
• Reset + hold
• Preset + hold
• Reset + totalize
• Preset + totalize
• Hold
Signed floating-point
Country-specific:
number
• 0 kg
• 0 lb
• Cancel
Cancel
• Reset + totalize
Operation
169
Advertisement
Table of Contents
