Endress+Hauser Proline Promass E 500 PROFINET Operating Instructions Manual page 124

Commissioning
Parameter
Failure mode
Invert output signal
* Visibility depends on order options or device settings
124
Prerequisite
The Pulse option is selected in
the Operating mode
parameter (→  122) and a
process variable is selected in
the Assign pulse output
parameter (→  123).
–
Configuring the frequency output
Navigation
"Setup" menu → Pulse/frequency/switch output
‣
Pulse/frequency/switch output
1 to n
Operating mode
Terminal number
Signal mode
Assign frequency output
Minimum frequency value
Maximum frequency value
Measuring value at minimum
frequency
Measuring value at maximum
frequency
Failure mode
Failure frequency
Invert output signal
Description
Define output behavior in
alarm condition.
Invert the output signal.
Proline Promass E 500 PROFINET
Selection / User Factory setting
interface / User
entry
• Actual value No pulses
• No pulses
• No No
• Yes
→  125
→  125
→  125
→  126
→  127
→  127
→  127
→  127
→  127
→  127
→  127
Endress+Hauser