RIGOL
Gauss
Press Wave, rotate the multifunction knob
knob to select it. You can also press Wave continuously or enable the touch screen
to select it. At this time, you can set the parameters for the Gauss waveform (as
shown in the figure below). For setting methods, refer to descriptions in "To Output
Sine".
Lorentz
Press Wave, rotate the multifunction knob
knob to select it. You can also press Wave continuously or enable the touch screen
to select it. At this time, you can set the parameters for the Lorentz waveform (as
shown in the figure below). For setting methods, refer to descriptions in "To Output
Sine".
17-8
Chapter 17 Function/Arbitrary Waveform Generator (Option)
to select "Gauss". Press down the
Figure 17-7 Gauss
to select "Lorentz". Press down the
Figure 17-8 Lorentz
MSO5000-E User Guide