Chapter 17 Function/Arbitrary Waveform Generator (Option)
RIGOL
Figure 17-7 Gauss
Lorentz
Click Wave to select "Lorentz". At this time, you can set the parameters for the
Lorentz waveform (as shown in the figure below). For setting methods, refer to
descriptions in "To Output Sine".
Figure 17-8 Lorentz
Haversine
Click Wave to select "Haversine". At this time, you can set the parameters for the
Haversine waveform (as shown in the figure below). For setting methods, refer to
descriptions in "To Output Sine".
DS8000-R User Guide
17-7