Exp.fall; Ecg; Gauss - Rigol DS8000-R Series User Manual

RIGOL

Exp.Fall

Click Wave to select "Exp.Fall". At this time, you can set the parameters for the
Exp.Fall waveform (as shown in the figure below). For setting methods, refer to
descriptions in "To Output Sine".

ECG

Click Wave to select "ECG". At this time, you can set the parameters for the ECG
waveform (as shown in the figure below). For setting methods, refer to descriptions
in "To Output Sine".

Gauss

Click Wave to select "Gauss". At this time, you can set the parameters for the Gauss
waveform (as shown in the figure below). For setting methods, refer to descriptions
in "To Output Sine".
17-6
Chapter 17 Function/Arbitrary Waveform Generator (Option)
Figure 17-5 Exp.Fall
Figure 17-6 ECG
DS8000-R User Guide