Chapter 17 Function/Arbitrary Waveform Generator (MSO7000 Option)
Exp.Fall
Press Wave, rotate the multifunction knob
knob to select it. You can also press Wave continuously or enable the touch screen
to select it. At this time, you can set the parameters for the Exp.Fall waveform (as
shown in the figure below). For setting methods, refer to descriptions in "To Output
Sine".
ECG
Press Wave, rotate the multifunction knob
to select it. You can also press Wave continuously or enable the touch screen to
select it. At this time, you can set the parameters for the ECG waveform (as shown in
the figure below). For setting methods, refer to descriptions in "To Output Sine".
Gauss
Press Wave, rotate the multifunction knob
MSO7000/DS7000 User Guide
to select "Exp.Fall". Press down the
Figure 17-5 Exp.Fall
to select "ECG". Press down the knob
Figure 17-6 ECG
to select "Gauss". Press down the
RIGOL
17-7