Ricoh fi-8040 Operator's Manual page 255

HINT
When entering a host name, the DNS servers need to be set on the scanner.
- Port Number
Depending on the setting for [Encryption], the initial value changes as follows:
● When [Encryption] is [Explicit Encryption (Explicit Mode)], the initial value is "21".
● When [Encryption] is [Implicit Encryption (Implicit Mode)], the initial value is "990".
The factory default setting is "21".
- Encryption
Set the encryption method for communications used when connecting to the FTPS server.
● Explicit Encryption (Explicit Mode)
This is the factory default setting.
● Implicit Encryption (Implicit Mode)
- Validate server certificates
Set whether to validate server certificates using CA certificates registered on the scanner.
The factory default setting is set to off.
HINT
When using a CA certificate, you can register the certificate in fi Series Network Settings.
For details, refer to
- Save Destination Path
The spaces before and after the character string and "/" prefix are ignored.
" " will be replaced with "/". When the first character is " ", the character will be replaced
with "/" and the leading "/" will be deleted.
- Username
Set the user name used to connect to the save destination.
You can also set the name in the "UserName@Domain" or "Domain UserName" format.
The space before or after the character string is ignored.
- Password
Enter the password for the user name used for connecting to the save destination.
Spaces before and after the character string are maintained.
HINT
The only connection mode for connecting to the FTPS server is "Passive Mode".
● SFTP
When [SFTP] is selected, specify the following items:
- Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
DirectScan Settings (Destination/Job/Scan Settings) (Touch Screen)
Network Settings (fi Series Network Settings) (page
255
359).