Ricoh fi-8040 Operator's Manual page 280

HINT
The below settings cannot be configured on the touch screen. Configure the settings in fi
Series Network Settings (browser).
● CA Certificates
Used for connecting to the SMTP and FTPS servers.
● Encryption Key
Used for connecting to the SFTP server.
For details, refer to Network Settings (fi Series Network Settings) (page
NTP Server
Set the NTP server to obtain the current time when using DirectScan.
ATTENTION
To use DirectScan, the time on the scanner needs to be synced with the time on the NTP
server in advance.
Note that the scanner cannot be connected to an NTP server that requires
authentication when syncing the time.
Acquisition Method
Set the method for obtaining the IP address of the NTP server.
● Obtain automatically (DHCP/Default Gateway)
This is the factory default setting.
HINT
One of the following conditions needs to be met:
● The information obtained from the DHCP server needs to include the NTP server
information.
● The NTP server is enabled on the default gateway.
● Obtain from Public Server
"pool.ntp.org" is used to connect to an NTP server.
● Configure manually
When [Configure manually] is selected, specify the following items:
- Primary
- Secondary
Timezone
Set the timezone of the region where the scanner is used.
Set the time difference from Coordinated Universal Time (UTC).
280
Scanner Settings (Touch Screen)
359).