Specifying The Cycle To Replace Consumables [Life Counter Alarm Setting] - Ricoh fi-8040 Operator's Manual

Specifying the Cycle to Replace Consumables [Life Counter Alarm Setting]

Specify the replacement cycle for the consumables.
The background color of the counter for [Brake Roller] or [Pick Roller] in [Device Setting] changes to
light yellow when the sheet count (after a consumable replacement) reaches 95% of the value
specified for this setting and turns yellow when the sheet count reaches 100%.
You can also display the message for replacing consumables, which is described in
Cleaning or Replacing Consumables (page
1
Start up the Software Operation Panel.
For details, refer to
2
From the list, select [Device Setting 2] → [Life Counter Alarm Setting].
3
Specify a value as the replacement cycle for each of the consumables (brake roller and pick
roller).
The value can range from 10,000 to 2,550,000 sheets (in increments of 10,000).
The factory default setting is "20".
326).
Starting Up the Software Operation Panel (page
328
Scanner Settings (Software Operation Panel)
Messages for
303).