Settings Related To Sheet Counters; Checking The Sheet Counters - Ricoh fi-8040 Operator's Manual

Settings Related to Sheet Counters

Checking the Sheet Counters

The status of each consumable part can be viewed to determine when to replace or clean the
consumables.
The background color of the counter changes as it gets closer to the time to replace the consumables
or to clean the scanner.
The color of each counter changes as follows:
● [Brake Roller]/[Pick Roller] counters
These counters turn light yellow when the sheet count after the consumable replacement reaches
95% of the value specified in
Setting] (page 328) in the Software Operation Panel, and turn yellow when the sheet count reaches
100%.
● [After cleaning] counter
This counter turns yellow when the sheet count after cleaning reaches the value specified in
Cleaning Cycle [Cleaning Cycle] (page 327)
1
Start up the Software Operation Panel.
For details, refer to
2
From the list, select [Device Setting].
Specifying the Cycle to Replace Consumables [Life Counter Alarm
in the Software Operation Panel.
Starting Up the Software Operation Panel (page
322
Scanner Settings (Software Operation Panel)
303).
Scanner