2
Confirm that the following main screen is displayed on the touch screen.
HINT
If the above screen is not displayed, refer to
(page 411)
to change the main screen.
3
Load a document in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
For details, refer to
How to Load Documents (page
4
Start an image scanning application.
5
Select a scanner driver to be used for scanning.
For some image scanning applications, selection of a scanner driver may not be needed.
6
Select the scanner to be used for scanning.
How to Change the Way the Scanner Is Used
88).
72
How to Perform a Basic Scan