Password For Editing Directscan Settings; Initialize Directscan Settings - Ricoh fi-8040 Operator's Manual

Password for Editing DirectScan Settings

Set a password for adding or changing the save destinations for images, the email addresses, or
the jobs when using DirectScan.
Set a password to prevent save destination paths or email addresses from being leaked.
Change the password regularly.
If you do not want to set a password, leave the field blank.
Click [Password for Editing DirectScan Settings] under [DirectScan] to display the window.
Password
Enter a password within 32 characters.
The following characters can be used for a password:
● Alphanumerical characters
● Space
● Symbols
-/:; &@".,?!'#%^=_|~*+$()[]`<>{}
● Diacritics
Spaces before and after the character string are maintained.
[Apply to the scanner] button
Applies the configured settings.

Initialize DirectScan Settings

Initializes the DirectScan settings to restore them to the factory default.
Click [Initialize DirectScan Settings] under [DirectScan] to display the window.
[Initialize DirectScan Settings] button
Restores the following DirectScan settings to the factory default.
● Save destinations for images
● Email addresses
● Jobs
● NTP server
● Settings for sending emails
● Password for editing DirectScan settings
The following settings will not be initialized.
● CA certificates
● Encryption key
Network Settings (fi Series Network Settings)
393