Specifying the Area to Detect Overlapped Documents [Document check
area specification for Multifeed Detection]
Specify an area to detect overlapped documents.
Specify this item when [Check Overlapping(Ultrasonic)] or [Check Overlapping and Length] is selected
for [Multifeed].
1
Start up the Software Operation Panel.
For details, refer to
2
From the list, select [Device Setting 2] → [Document check area specification for Multifeed
Detection].
3
Specify the detection range.
Select the [Selected range] check box.
Starting Up the Software Operation Panel (page
340
Scanner Settings (Software Operation Panel)
303).