Ricoh fi-8040 Operator's Manual page 377

HINT
When entering a host name, the DNS servers need to be set on the scanner.
- Port Number
The factory default setting is "21".
- Connect Mode
Set the connect mode used to connect to the FTP server.
● Active Mode
● Passive Mode
This is the factory default setting.
- Save Destination Path
The spaces before and after the character string and "/" prefix are ignored.
" " will be replaced with "/". When the first character is " ", the character will be replaced
with "/" and the leading "/" will be deleted.
HINT
If the save destination path contains characters that cannot be displayed on the touch
screen of the scanner (such as environment-dependent characters), the path may not
display correctly on the screen.
- Username
Set the user name used to connect to the save destination.
You can also set the name in the "UserName@Domain" or "Domain UserName" format.
The space before or after the character string is ignored.
HINT
If the user name contains characters that cannot be displayed on the touch screen of the
scanner (such as environment-dependent characters), the name may not display correctly
on the screen.
- Password
Enter the password for the user name used for connecting to the save destination.
Spaces before and after the character string are maintained.
● FTPS
When [FTPS] is selected, specify the following items:
- Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
Network Settings (fi Series Network Settings)
377