Ricoh fi-8040 Operator's Manual page 222

1
On the touch screen, press
connection (Ping)].
2
In the [Check connection (Ping)] screen, enter the IP address of the DNS server, and
press the [Run] button.
The result is displayed.
Refer to the connection test result from
Scanner (page 412)
If the DNS server does not function normally, contact the DNS server administrator.
HINT
The IP address for the DNS server can also be checked in fi Series Network Settings.
For details, refer to
●
Are the scanner and image destination connected to the network?
Solution
Refer to Cannot Connect the Scanner and a Computer via a Wired LAN (page 202)
measures accordingly.
●
Is the IP address of the scanner correct?
Solution
Check the IP address of the scanner in the following procedure:
1
On the touch screen, press
[IP Address (IPv4)] or [IP Address (IPv6)].
2
On the [IP Address (IPv4)] or [IP Address (IPv6)] screen, check the setting items for the
following.
When specifying an IP address manually, specify the correct IP address.
When setting the IP address automatically, check whether the DHCP server functions
normally.
Even when the DHCP server functions normally, an IP address may not be assigned
correctly depending on the settings for the DHCP server. Check the operation status
and the settings for the DHCP server.
HINT
The IP address of the scanner can also be checked in fi Series Network Settings.
For details, refer to
→ [Scanner Settings] → [Network] → [Check
and take measures accordingly.
Network Settings (fi Series Network Settings) (page
→ [Scanner Settings] → [Network] → [Wired LAN] →
Network Settings (fi Series Network Settings) (page
222
How to Check the Network Connection for the
Troubleshooting
359).
and take
359).