Ricoh fi-8040 Operator's Manual page 271

Setting Item
Cleaning &
Maintenance (page
299)
Function Selection Display (page 301)
USB (page 301)
Admin Password (page 301)
Restore Factory Defaults (page 302)
ATTENTION
You cannot back up or restore the scanner settings on the touch screen.
Dropout Color (page
297)
Offset (page 297)
Magnification (page
298)
Cleaning cycle (page
299)
Replacement of the
Pick Roller (page 299)
Replacement of the
Brake Roller (page
299)
Maintenance cycle
(page 300)
271
Scanner Settings (Touch Screen)
Description
You can exclude a color from being scanned by
selecting either red, green, or blue (three
primary colors).
Specify a starting position for scanning.
Specify the magnification level for the feed
direction.
Specify the cleaning cycle for the scanner inside.
Specify the replacement cycle for the pick roller.
Specify the replacement cycle for the brake
roller
Specify the maintenance and inspection cycle
for the scanner that is performed by a service
engineer.
When using the scanner connected to a
computer, specify whether to display buttons
with no name in the [Function Selection] screen.
Change the USB setting if an error occurred on
a computer during communication.
Change the administrator password.
Restore the scanner settings to the factory
default.