Sending Images by Email
This section explains how to send images by email by using [Send by E-mail] for DirectScan.
ATTENTION
Note that you first need to configure the settings for sending email in [Send E-mail] of the scanner
settings.
For details about [Send E-mail], refer to
1
Confirm that the following main screen is displayed on the touch screen.
HINT
If the above screen is not displayed, refer to
(page 411)
to change the main screen.
2
Load a document in the ADF paper chute (feeder).
Scanner Settings (Touch Screen) (page
How to Change the Way the Scanner Is Used
135
Various Ways to Scan (DirectScan)
269).