Changing A Job - Ricoh fi-8040 Operator's Manual

Changing a Job

This section explains how to change the job settings that are used for DirectScan.
1
In the main screen, press the [Perform Job] button.
2
In the [Select Job] screen, press
3
In the [Edit Job] screen, press the job to change and press
HINT
When you select a job and press
4
In the [Edit Job] screen, change the settings and press the [Set] button.
For details about the [Edit Job] screen, refer to
5
In the [Edit Job] screen, press
The job in the [Select Job] screen is updated.
.
or , the job moves up or down by one.
Add Job/Change Job (page
.
148
Various Ways to Scan (DirectScan)
.
258).