Daily Care; Cleaning Materials - Ricoh fi-8040 Operator's Manual

Daily Care

This section describes how to clean the scanner.
● Do not use aerosol spray or spray that contains alcohol. Paper dust blown up by
CAUTION
● The inside of the ADF becomes very hot when the scanner is being used.

Cleaning Materials

Name
Cleaner F1
Cleaning Paper
Cleaning Wipe
Cotton swab
Dry cloth
strong air from the spray may enter inside the scanner which may cause the
scanner to fail or malfunction.
Also note that sparks generated by static electricity may cause a fire.
Before you start cleaning the inside of the ADF, make sure to turn off the
power, unplug the power cable and wait for at least 15 minutes for the inside
of the ADF to cool down.
Part No.
PA03950-0352
CA99501-0012
PA03950-0419
Commercially
available
Notes
100 ml
Liquid cleaner to use for removing dirt and
stains
10 sheets
Used to clean the inside of the scanner with
ease.
Spray it with Cleaner F1 and scan it with the
scanner in the same way as a document.
24 packets
Pre-moistened with Cleaner F1. It can be used
instead of moistening a cloth with Cleaner F1.
Used to clean a tiny part such as the ultrasonic
sensor.
Used to wipe off dirt and stains. Moisten it with
Cleaner F1 for cleaning.
150