How To Start Up Scanner Selection Tool - Ricoh fi-8040 Operator's Manual

●
"99% packet loss" shown in the test result
Meaning
Communication with the destination specified in [Host Name/IP address] is unstable.
Solution
Refer to Cannot Connect the Scanner and a Computer via a Wired LAN (page 202)
measures accordingly.
●
"ping: bad address" shown in the test result
Meaning
The name-resolution or address-resolution for the destination specified in [Host Name/IP
address] may have failed.
Solution
● Make sure that [Host Name/IP address] is specified correctly.
● Make sure that the DNS server settings are correct.
● If [Host Name/IP address] is specified correctly, refer to
Server with the Specified Host Name (page 211)
● Refer to Cannot Connect the Scanner and a Computer via a Wired LAN (page 202)
measures accordingly.

How to Start Up Scanner Selection Tool

To use the scanner connected to a network from a computer, you need to select the scanner in
Scanner Selection Tool.
For details about Scanner Selection Tool, refer to the Network Setup Tool for fi Series Help.
Scanner Selection Tool can be started up in the following procedure:
● For Windows Server 2012
Right-click the Start screen, and select [All apps] on the app bar → [Scanner Selection Tool for fi
Series] under [fi Series].
● For Windows Server 2012 R2
Click [↓] on the Start screen and select [Scanner Selection Tool for fi Series] under [fi Series].
To display [↓], move the mouse cursor.
● For Windows 10/Windows Server 2016/Windows Server 2019/Windows Server 2022
Click [Start] menu → [fi Series] → [Scanner Selection Tool for fi Series].
● For Windows 11
Click [Start] menu → [All apps] → [fi Series] → [Scanner Selection Tool for fi Series].
Cannot Connect the Scanner to the
for further solutions.
413
Appendix
and take
and take