Ricoh fi-8040 Operator's Manual page 212

1
On the touch screen, press
[DNS Server].
2
On the [DNS Server] screen, check the setting items for the following.
● Whether the primary DNS and secondary DNS settings are correct
HINT
The DNS server settings for the scanner can be checked in fi Series Network Settings.
For details, refer to
●
Does the DNS server function normally?
Solution
Check whether the DNS server functions normally by following the procedure below.
1
On the touch screen, press
connection (Ping)].
2
In the [Check connection (Ping)] screen, enter the IP address of the DNS server, and
press the [Run] button.
The result is displayed.
Refer to the connection test result from
Scanner (page 412)
If the DNS server does not function normally, contact the DNS server administrator.
HINT
The IP address for the DNS server can also be checked in fi Series Network Settings.
For details, refer to
●
Are the scanner and server connected to the network?
Solution
Refer to Cannot Connect the Scanner and a Computer via a Wired LAN (page 202)
measures accordingly.
●
Is the IP address of the scanner correct?
Solution
Check the IP address of the scanner in the following procedure:
→ [Scanner Settings] → [Network] → [Wired LAN] →
Network Settings (fi Series Network Settings) (page
→ [Scanner Settings] → [Network] → [Check
and take measures accordingly.
Network Settings (fi Series Network Settings) (page
212
How to Check the Network Connection for the
Troubleshooting
359).
359).
and take