Ricoh fi-8040 Operator's Manual page 51

d
In the [Add Job] screen, configure the settings and press the [Set] button.
e
Make sure that the job has been added in the [Edit Job] screen and press
f
In the [Select Job] screen, press
The screen switches to the main screen.
HINT
For details about save destinations, recipient addresses, jobs, and scan settings, refer to the
following:
● Adding/Changing/Deleting a Save Destination for Images (page 138)
Adding/Changing/Deleting an Address when Sending Images by Email (page 142)
●
Adding/Changing/Deleting a Job (page 146)
●
DirectScan Settings (Destination/Job/Scan Settings) (Touch Screen) (page 251)
●
12
Check whether the scanner is ready to start scanning.
● When saving images to a folder on the network
In the main screen, press the [Save to a folder] button.
● When sending images by email
In the main screen, press the [Send by E-mail] button.
● When processing a job
In the main screen, press the [Perform Job] button.
For details, refer to the following:
How to Perform a Basic Scan (page 69)
●
Various Ways to Scan (DirectScan) (page 132)
●
.
51
Scanner Setup
.