How To Use - Ricoh fi-8040 Operator's Manual

How to use

How to use
How to use
Set the usage method of the scanner.
For details about how the scanner can be used, refer to
● Use the scanner connected to a computer
Use the scanner by connecting it to a computer via a USB cable or wired LAN.
This is the factory default setting.
● Use the scanner by itself (DirectScan)
Connect the scanner to a network via a wired LAN to perform the operations from scanning
documents to saving the images or sending them by email.
When [Use the scanner by itself (DirectScan)] is selected, specify the following items:
[Show the job list initially] check box
Select whether to set the screen that displays the job list as the initial screen (main screen)
when using DirectScan.
The check box is cleared for the factory default setting.
● Use by connecting to PaperStream NX Manager
Use the scanner by connecting it via wired LAN to a server where PaperStream NX Manager is
installed.
[Apply to the scanner] button
Applies the configured settings.
Network Settings (fi Series Network Settings)
How to Use the Scanner (page
366
24).