Ricoh fi-8040 Operator's Manual page 294

HINT
● When [Continuous Feed Mode] is set to on, the scanner will wait for documents to be
loaded until the specified timeout time elapses even if you start scanning with no
document in the ADF paper chute (feeder).
● When Manual Single Mode is used, the scanner will wait for documents to be loaded until
the specified timeout time elapses regardless of the setting for [Continuous Feed Mode].
High Altitude Mode
Enable this mode to use the scanner at an altitude of 2,000 m or higher.
Low atmospheric pressure at high altitudes may lower the accuracy in detections for
overlapped documents with the ultrasonic sensor.
Enable
Setting [Enable] to on for this item improves the accuracy to detect overlapped
documents.
The factory default setting is set to off.
294
Scanner Settings (Touch Screen)