Ricoh fi-8040 Operator's Manual page 245

●
Are the glass and rollers inside the ADF clean?
Solution
Clean the dirty parts.
For details, refer to
●
Is the Roller Set S worn out?
Solution
Check the counters for the consumables using one of the following methods.
● The [Consumable counters] screen on the touch screen
The screen can be displayed in the following procedure:
→ [Cleaning & Maintenance] → [Consumable counters]
● Software Operation Panel
For details, refer to
If necessary, replace the Roller Set S.
For details, refer to
●
Is there any foreign matter in the ADF?
Solution
Clean the ADF.
Remove any foreign matter from the ADF.
For details, refer to
●
Did you place a thick document inside the Carrier Sheet?
Solution
Some papers may be too thick to place inside the Carrier Sheet.
Use documents that meet the requirements.
For details, refer to
Daily Care (page 150).
Clearing the Sheet Counters (page
Replacing the Roller Set S (page
Daily Care (page 150).
Conditions for Using the Carrier Sheet (page
245
325).
168).
105).
Troubleshooting