Ricoh fi-8040 Operator's Manual page 385

● For PA03836-B001/PA03836-B003/PA03836-B023
Front Side
● For PA03836-B005/PA03836-B015
Both Sides
For the product label, refer to
Resolution (dpi)
Specify the resolution for images.
● 150
● 200
● 240
● 300
This is the factory default setting.
Thumbnail Screen
Select whether to display thumbnails on the touch screen to check images after
documents are scanned.
The factory default setting is [Display].
When [Display] is selected, the maximum number of sheets that can be scanned at once is
60 sheets in duplex scanning mode and 120 sheets in simplex scanning mode.
HINT
Thumbnail images are displayed at a lower resolution than the actual images to be
saved in a folder or sent by email.
Use the thumbnails to check whether all the images of scanned documents have been
output.
Submission Confirmation Screen
Set whether to display a confirmation window before saving images to a folder on the
network or sending them by email after documents are scanned.
The factory default setting is [Display].
Advanced settings
Configure the advanced scan settings to be used when documents are scanned with the
scanner.
Clicking [Advanced settings] allows you to specify the following items:
● Basic (page 386)
● Image (page 386)
● Page (page 387)
Paper Feeding (page 388)
●
Batch (page 389)
●
Checking the Product Label (page
385
Network Settings (fi Series Network Settings)
250).